Industrial Adhesives | Cyanoacrylate Adhesive | Anaerobic Adhesive | UV Curing Adhesives | Cyanoacrylate Manufacturer | Cyanoacrylate

CYBERCRYL™ 810
结构组装用胶
High Strength Structural Adhesive

60分钟 机构组装用胶厌氧功能金属热固性塑料热塑性塑料工程塑料复合材料之结构性接着

Cyberbond Cybercryl™ 810 具有较长之可工作时间(约60min.), 同时设计为具有缺氧作用, 组合后可在20min.内固定.

Cybercryl 810 is a methacrylate-based structural adhesive designed for bonding

engineered thermoplastics,
thermosets, composites,
nylon,
e-coat
metal

Cybercryl 810 has a unique curing system that allows for long open time for assembly operations yet has a relatively short fixture time. Cybercryl 810 has exceptional durability and environmental resistance.

	适合材质 : Suitable Substrates to bond
	铝, 铝合金, 铁, 不锈钢, 铜, PMMA, ABS, ABS+PC, ABS+Glass fiber, PVC,FRP,陶瓷...等
	Aluminum, Aluminum alloy, steel, Stainless steel, ABS, PMMA, Nylon, ABS+PC, FRP, Ceramic, Wood...

	FEATURE - Cybercryl 810 特色 :		相关资料 Reference Data:
	抗冲击特性. Good Impact Resistance 强度高于玻璃纤维. Better than fiberglass 快速组装. Excellent Fixture Speeds. 高强度架构性接着. High strength structural adhesive 耐温可达250 F (121 C). Temperature resist up to 250 F. 接着部位不会生锈. Composites do not rust. 可容许之接着间系大. Great Gap Fill 对于电镀金属之接着强度达2500~3000psi. (170~205 kg/cm2). 2500~3000 psi on galvanized metals		产品技术数据 Data Sheet
			物质安全数据表 MSDS
			型录下载 Catalogue Download
			使用说明 Useful Hit
			Dual Cartridge operation
			技术咨询 Technical Inquire
			混合管规格　Mixer Specifications
			TS 16949 品质认证
			Dispense design
			何处购买 Where to buy

			包装 Package
			50ml dual cartridge 400ml dual cartridge

	产品线设计　Producing Line Design:
	使用专用手动点胶枪. Manual Dispenser. 使用气动式点胶枪. Pneumatic Dispenser. 架设于XYZ三轴机器手臂点胶机.　Operation via XYZ Robotic Dispenser.

	使用方式 : Instructions For Use
	Dual Cartridge Application: 若使用专用Dual-cartridge胶枪(50ml 包装), 接着剂挤出时会经过前端之静态混合管(static mixer)依比例混合, 混合后之接着剂直接施胶于欲组装之其中之一工件上, 再可工作时间(working time)内将两工件组合, 较小之工件可使接着剂溢胶以增加接着面积获得更高之接着强度, 间系较大之工件有时需两面上接着剂, 并轻压使接着剂分散以确保接着剂与两材质接触到. Typical Process Methods Apply mixed adhesive directly to one surface in even or beaded manner. Assemble the parts within the recommended working time. Obtain firm contact between the parts to minimize any gap and ensure good contact. A small fillet of adhesive should flow out of the edges to show adequate gap-filling. For large gaps, apply enough adhesive to both surfaces and spread to cover the entire area, or make a bead pattern on both sides which will allow flow throughout the bond line.