CYBERCRYL™ 801F
快速型结构组装用胶
Fast Cure Structural Adhesive
 
　 1~2分钟 快速硬化机构组装用胶
 金属/塑料/复合材料之结构性接着
Cyberbond Cybercryl™ 801F 高强度双液型架构用胶为 对于大部分金属及塑料接具有非常高之接着强度, 尤其对于复合材料具有优越之接着性能.
　 Cybercryl 801F is a methacrylate-based structural adhesive designed for bonding engineered thermoplastics, thermosets, composites and metal structural elements together in any combination. The Cybercryl 801F features a very fast fixture time is production where speed is essential. Cybercryl 801F has low viscosity for dispensing purposes but is designed to increase in viscosity when mixed for a non-sag application. 
　 适合材质 :
　 铝, 铝合金, 铁, 不锈钢, 铜, PMMA, ABS, ABS+PC, ABS+Glass fiber, PVC,FRP,陶瓷...等
Aluminum, Aluminum alloy, steel, Stainless steel, ABS, PMMA, Nylon, ABS+PC, FRP, Ceramic, Wood.. 
　 FEATURE - Cybercryl 801F 特色 :
相关资料:
　

抗冲击特性.
Good Impact Resistance

强度高于玻璃纤维.
Better than fiberglass

快速组装.
Excellent Fixture Speeds.

高强度架构性接着.
High strength structural adhesive

耐温可达250 F (121 C).
Temperature resist up to 250 F.

接着部位不会生锈.
Composites do not rust.

可容许之接着间系大.
Great Gap Fill

对于电镀金属之接着强度达2500~3000psi.
(170~205 kg/cm2). 2500~3000 psi on galvanized metals
产品技术数据 Data Sheet
物质安全数据表 MSDS
型录下载 Catalogue Download
使用说明 Useful Hit
Dual Cartridge operation
技术咨询 Technical Inquire
混合管规格　Mixer Specifications
TS 16949 品质认证
Dispense design
何处购买 Where to buy
　 　
  包装 Package
　

50ml dual cartridge
400ml dual cartridge

　
　 Technical Data: 产品线设计　Producing Line Design:
　 颜色 : 白色
混合后黏度 : 250,000 cps
可操作时间 Open time : 1 min.
固定时间 Fixture time : 3~4 min.
耐温范围 : -40 ~250 oF
接着强度Tensile shear strength
- 铝 VS. 铝 : 2600 psi
- 铁 VS.铁 : 3500psi
- 玻纤VS.玻纤 : 材质拉断
- PMMA VS. PMMA : 材质拉断
- SMC VS. SMC : 材质拉断
- PVC VS. PVC : 材质拉断		   
  1. 使用专用手动点胶枪. Manual Dispenser.
  2. 使用气动式点胶枪. Pneumatic Dispenser.
  3. 架设于XYZ三轴机器手臂点胶机.　Operation via XYZ Robotic Dispenser.
　 　
　 使用方式 : Instructions For Use 　
　 Dual Cartridge Application:
若使用专用Dual-cartridge胶枪(50ml 包装), 接着剂挤出时会经过前端之静态混合管(static mixer)依比例混合, 混合后之接着剂直接施胶于欲组装之其中之一工件上, 再可工作时间(working time)内将两工件组合, 较小之工件可使接着剂溢胶以增加接着面积获得更高之接着强度, 间系较大之工件有时需两面上接着剂, 并轻压使接着剂分散以确保接着剂与两材质接触到.

Typical Process Methods
Apply mixed adhesive directly to one surface in even or beaded manner. Assemble the parts within the recommended working time. Obtain firm contact between the parts to minimize any gap and ensure good contact. A small fillet of adhesive should flow out of the edges to show adequate gap-filling. For large gaps, apply enough adhesive to both surfaces and spread to cover the entire area, or make a bead pattern on both sides which will allow flow throughout the bond line.
 　

　
瞬间接着剂 | 厌氧胶| UV胶 | 密封胶 | 环氧树脂 | 结构胶 | 型录下载 | Email to us

Copyright 2006 上海捷德化工有限公司 版权所有 中华人民共和国信息产业部 ICP备案号/许可证:沪ICP备06030505号
TEL:+86-21-6427-1448 FAX:+86-6486-3684 Email: sales@jedo.cn
Home Page About us News Products Download Contact Information Cyberbond Globe Traditional Chinese Simpified Chinese Cyberbond L.L.C. Cyberbond Enrope France