 |
  |
|
|
 |
Additional Products |
|||
| 本页为特殊用途, 研发中或项目开发之产品, 可能有些产品尚未量产化或只接受定制, 请洽询我们是否量产. | |||
| ECP
1299 耐冲击环氧树脂接着剂 High vibration reisstance epoxy adhesive |
SR120
Silicone Rubber 材质表面处理剂 -UV 接着剂专用 Adhesive promoter for Silicone rubber |
||
| ECP 1299 is a special two components epoxy with high impact formulation. Products use for bonding of metals, plastics and rubbers. |  |
Solvent contained primer for silicone rubber surface treatment by heating, the surface treated with SR120 to increase bonding ability is ideal for UV and cyanoacrylate adhesive bonding. |  |
PPA-500 PP接着促进剂- 添加型 |
ECP
1297 PU及橡胶专用环氧树脂接着剂 |
||
PPA-500 is speciall chemical
additive promote PP bonding. |
 |
ECP 1297 is a special two components epoxy for PU and rubber bonding. |  |
ECP
2560 低黏度环氧树脂填缝胶 |
SL80201
FPC/PET 软性电路板UV披覆胶 UV Adhesive for FPC |
||
| ECP 2560 is low viscosity epoxy potting resin for small gap filling. |  |
SL80201UV-visible curable adhesive used for potting, sealing and bonding, cured resin has good adhesion to plastic with excellent chemical resistance. SL80201 is toughened adhesive for Polycarbonate, PMMA, FPC, Ployimide, ITO film and glass bonding. | |
EP
147 低温热烤型Epoxy (单液型) |
P33
遠欬攷眲楷邐撙 Epoxy Forming agent |
||
| EP-147 is single part, heat cure structural adhesive for bonding of metal substrates. Product cure by heating 5~7min at 100 deg.C . Product formulate with high tensile shear strength and excellent adhesion on Aluminum, stainless steel, copper, PCB and ceramic. |
 |
||
SL800LC
低收缩UV/热烤双固化型接着剂 (光学透明) |
HC
8903A High abrasion UV top coat |
||
|
SL800LC
is single compound UV Anaerobic curable adhesive for bond and seal
application in where require low shrinkage during cure and moisture
resistance. 800LC exhibits high tensile shear strength on glass and metals, the cured resin has excellent resist to temperature, thermal cycling and moisture. The anaerobic curable function allow dark cure for the positions Light can not reach. |
HC-8903A
为透明之紫外光硬化型抗磨保护漆, 使用于喷涂及浸泡涂装方式。产品经由预热挥发溶剂后以足够能量之紫外光照射后硬化 形成高硬度之透明薄膜接着于材质表面,
作为抗磨防止、底漆退色、防尘、防水及增加光泽. HC-8903A is solvent contained UV top coating resin for operation by spray or dipping. Product cure by UV light after pre-bake to evaporate solvent. Cured Resin forms a clear layer onto surface and increase surface abrasion, water and chemical resistance. |
 |
|
SL80922blue
UV 披覆胶 |
GM
102 可见光硬化接着剂 |
||
| 80922 blue is fast cure UV visible light curable adhesive used for potting and sealing, cured resin has excellent surface dry and form a blue resin with excellent water and chemical resistance. |  |
GM-102为单液、高强度之紫外光及可见光硬化接着剂, 主要使用于玻璃材质之接着, 接着剂可经由照射特定波长范围及足够能量之光源而固化。SlinkR PhotoCure GM-102主使用于公差较小及平面之结构性接着, 并设计为可使用高功率卤素灯及水银灯照射即可硬化. |  |
P9430
油性感压胶 |
P9435
油性感压胶 |
||
| P9430 is solvent base, single part pressure sensitive adhesive, P9430 exhibits excellent adhesion and peel off strength for most plastics, metals, glasses, paper and rubbers. | P9435 is solvent base, single part pressure sensitive adhesive, P9435 exhibits excellent adhesion and peel off strength for most plastics, metals, glasses and rubbers. | ||
Copyright 2006 上海捷德化工有限公司 版权所有 中华人民共和国信息产业部 ICP备案号/许可证:沪ICP备06030505号
TEL:+86-21-6427-1448 FAX:+86-6486-3684 Email: sales@jedo.cn